Flashing Samsung Stock Firmware 4files By Odin

Tutorials flashing Samsung Stock Firmware 4files By Odin Down-loader Application on Windows Computer.

Flash Samsung stock firmware 4 files

SAMSUNG AND SAMSUNG ONLY. THIS IS A GENERAL GUIDE. NO GUARANTEE ON ANYTHING. DO IT AT YOUR OWN RISK.

FLASHING STOCK ROM VIA ODIN WILL DEFINITELY WIPE YOUR DATA. BACKUP DATA FIRST.

Requirements: You need to have Windows Computer and Samsung Device in order to follow the below guidelines.

1: Download and install Samsung USB Driver on your computer (if Samsung USB Driver is already installed on your computer then SKIP this step).

2:Download and extract Odin Downloader on your Computer (if you already have Odin Downloader then SKIP this step).

3: Download and extract Samsung Stock Firmware (4 files) on your computer. After extracting the firmware you will be able to see similar files
(file name varies as per device model number):

Content stock firmware 4 files

 

PIT/Ops: Partition Information Table
BL/BOOT: Boot loader Files
AP/PDA: system partition with recovery and stuff
CP/MODEM: Phone modem
CSC: Countries or carriers like Wi-Fi Calling.

================================================

AP_G530HDCU1AOA2_132828_REV00_user_low_ship_MULTI_CERT.tar.md5 BL_G530HDCU1AOA2_132828_REV00_user_low_ship_MULTI_CERT.tar.md5 CP_G530HDCU1AOA2_132828_REV00_user_low_ship_MULTI_CERT.tar.md5 CSC_OJV_G530HDCU1AOA2_148649_REV00_user_low_ship_MULTI_CERT.tar.md5 FORTUNA3G_EUR_OPEN.pit

 

4: Power Off your Samsung Device.

5: Now, you need to boot your Samsung Device into the Download Mode. get into the download mode: Press and Hold Power + Home + Volume Down Key at the same time for 8 seconds.

6: Once you have booted into the download mode, you will be able to see the Warning Triangle on your device screen. Now, you need to press the Volume UP key to continue.

7: Open Odin Downloader (Flash Samsung stock firmware 4 files ).

8: Once Odin Downloader is launched, you need to connect your Samsung Device to the computer using the USB cable.

9: Once your device is connected, Odin will automatically detect it and you will be able to see Added message in Odin Log area.

10: Now, Click on BL/BOOT button and select the BL/BOOT file from stock firmware 4 files folder.

11: Now, Click on AP/PDA button and select the AP/PDA file from stock firmware 4 files folder.

12: Now, Click on CP/MODEM button and select the CP/MODEM file from stock firmware 4 files folder.

13: Now, Click on CSC button and select the CSC file from stock firmware 4 files folder.

14: Now, Click on Start button to begin the flashing process.Flash Samsung stock firmware 4 files

15: Once flashing process is completed, you will be able to see the Green Pass message in Odin. Now, disconnect your device from the computer.

16: Now, restart your device (ignore if your device is already started).

Flash Samsung stock firmware 4 files

If failed, what should you do?
Try these things first:
Update your device driver software to the latest.
Restart your computer.
Run Odin as Administrator.
Try different cable (original one or the one with better quality) and USB port (the main port recommended)
Re-download the firmware file, make sure it is intact and match your device model